Garden submersible pump

Complete pump system with integrated electronics for underwater setups in rainwater reuse systems. This pump system is ideal for rainwater systems in the garden, so a rainwater tank with built-in rainwater pump. The integrated rainwater pump control system automatically controls the on/off of the rainwater pump on the basis of the fact that a tap is opened or closed by the user. The pump control also protects the pump against dry running. The GEP Divepress submersible pump, a hydrophor of the submersible pump type, is therefore installed invisibly and silently at the bottom of the rainwater citern. The control with dry run protection is built into the pump, so not loose like most rainwater pumps. The pump can be supplied with 2 types of suction systems. The solid suction has the advantage that as soon as the water level rises again, it automatically fills up again, whereupon the risk of overheating becomes zero. The suction hose has the advantage to always suck the cleanest water out of the citern, about 10 cm below the water surface in the rainwater tank. - The pump starts automatically when a tapping point is opened and stops when the tapping point is closed. - Equipped with internal capacitor, double mechanical seal and thermal protection. - Equipped with a check valve and 15 meters of cable. - Full corrosion resistant materials. - Mechanical seal. - Built-in thermal protection. - Max. immersion depth 7 meters.